 |
|
 |
 |
粤斯孚润滑油
电话：0755-29823858
传真：0755-29825358
手机：13928498386
联系人：杨经理 |
|
|
 |
 |
深圳市粤斯孚润滑油有限公司
电话：0755-29823858
传真：0755-29825358
手机：13928498386
联系人：杨经理
邮箱：3244781752@qq.com
地址：深圳市宝安区龙华人民中路美丽AAA大厦128号
|
|
|
| 产品目录 >> BP Enersyn GCS 180 |
|
BP Enersyn GCS 180 详细说明 （浏览1044次） |
09/95/UK (CSU) Page 1 of 3
_______________________________________________________________________
Enersyn GCS-180
Synthetic Gas Compressor Lubricant
Description; Description
Enersyn GCS 180 is a fully synthetic polyglycol gases such as ethylene, vinyl chloride and
lubricant. It has been developed to meet the butadiene. The lubricant contains oxidation and
demanding lubrication requirements of re- corrosion inhibitors, providing excellent thermal and
liquefaction compressors working on LPG oxidation stability, together with the necessary
(liquefied petroleum gases) such as butane, corrosion protection for the compressor.
propane and propylene, on LNG (liquefied natural
gas) such as methane, and on hydrocarbon and
chemical
Applications; Applications
Enersyn GCS 180 is for use in the working sumps Painted surfaces - Normal industrial paints are not
of both rotary and reciprocating compressors in compatible with this lubricant. Surfaces should be
which the lubricant is in continuous contact with left unpainted internally, or alternatively should be
gas. If mineral oils were to be used in these painted with two-component coatings such as epoxy
applications, the gas would dissolve readily in the resins.
oil and cause a drastic reduction in viscosity, thus Miscibility - This product is not miscible with mineral
introducing the possibility of compressor failure oils.
due to inadequate lubrication. Seal Materials - Care must be taken to ensure that
Hydrocarbon gases dissolve to a much lesser seal materials are compatible with GCS 180. The
extent in Enersyn GCS 180, so the lubricant re
commended materials are nitrile rubber (NBR),
maintains a higher working viscosity than a mineral fluoro-silicone rubber and vinyl-methyl-polysiloxane
oil of the same initial viscosity, thereby ensuring rubber (VMQ). Incompatible materials are likely to
adequate lubrication performance and a long shrink or swell excessively, thus causing either
working life. severe leakage or seizure of the seal.
Enersyn GCS 180 is approved by Sulzer, Sabroe
and Atlas Copco Energas (formerly Linde
Compressors).
Main Benefits; Main Benefits
- Because of the low solubility of hydrocarbon - Multi-gas service obviates the need to change
chemical gases in GCS 180, foaming and lubricants when handling different gases. This
viscosity-reduction are minimal; this ensures the simplifies lubricant inventories and so reduces
maintenance of hydrodynamic lubrication, and overall costs.
hence protection against wear.
- Long working life resulting in lower maintenance
costs.
Storage; Storage
All packages should be stored under cover. Where of drum markings. Products should not be stored
outside storage is unavoidable drums should be above 60°C, exposed to hot sun or freezing
laid horizontally to avoid the possible ingress of conditions.; of drum markings. Products should not
http://129.35.64.91/bpglis/lubtds.nsf/technicaldata/7D7F13F8C080397280255FC8004... 16/11/2005
09/95/UK (CSU) Page 3 of 3
It is the User’s obligation to evaluate and use products safely BP Lubricants and Special Products Limited
and within the scope advised in the data sheet and to comply Witan Gate House Lubricants Helpline: 0845 - 6031080
with all applicable laws and regulations. No statement made in 500/600 Witan Gate Fax: 0845 - 6031070
this publication shall be construed as a permission, MILTON KEYNES
recommendation or authorisation given or implied to practice MK9 1ES (C) BP Oil UK Ltd.; BP Lubricants and Special Products
any patented invention without a valid licence.; It is the User’s Limited
obligation to evaluate and use products safely and within the Witan Gate House Lubricants Helpline: 0845 - 6031080
scope advised in the data sheet and to comply with all 500/600 Witan Gate Fax: 0845 - 6031070
applicable laws and regulations. No statement made in this MILTON KEYNES
publication shall be construed as a permission, MK9 1ES (C) BP Oil UK Ltd.
recommendation or authorisation given or implied to practice
any patented invention without a valid licence.
Date Created: 05/05/1993 07:56:57 Last Modified:04/10/2005
http://129.35.64.91/bpglis/lubtds.nsf/technicaldata/7D7F13F8C080397280255FC8004... 16/11/2005 |
上一产品： Enersyn CL1400 S150
下一产品： BP Enersyn RC-S100
|
|
